Flap Gate JDYZ-15
Flap gate JDYZ-15 is used to control pedestrian access between public and secure areas, which is suitable for applications requiring ultra high speed access and medium levels of security. Equipped with standard interfaces, it is compatible with any access control and widely used for park, school , office building, living communities., etc. The gate will auto open to keep the passage unimpeded in case of an emergency or power failure. Durable design ensure its life span up to at least 3.5 million times and minimal maintenance costs involved.
Features
1. Compatible with any type of access control systems such as facial recognition system, ticketing system.
2. Equipped with sensors to detect unauthorized entries or tailgating attempt
3. Auto Reset: the lane close automatically if the pedestrian does not pass within pre-set time
4. Auto open to ensure passage free when power failure or emergency.
5. Low power consumption and low noise operation
6. Low maintenance cost and easy to use and install.
7. One-way or bi-directional operational mode
Applications
Government
Park
School
Residential area
Office building
Metro terminal
Factory
Parameters
| Housing Material | 1.5mm~2.0mm #304 stainless sheet |
| Dimension | 1400 x 280 x 980mm |
| Power Supply | AC220V / AC110V, 50/ 60 Hz |
| Channel Width | 550mm |
| Drive Motor | DC 24V brush motor |
| Pass Speed | 40 persons per minute |
| Input signal optional | Dry contact signal or +12V level signal or DC12V pulse signal |
| Rotating Direction | Bi-directional |
| Communication interface | RS485 |
| Arm drop when power failure | Yes |
| Open Time | 0.2 second |
| Life Cycle | >3.5 million times |
| Working Temperature | -30°C~+70°C |
| Working Environments | Indoor, outdoor (with shelter) |
Dimension
System Diagram
