Recommended Products




Vertical tripod barrier gate JDGD-1 is a safe and effective entrance control solution for restricting access to regions while offering users a comfortable and secure entry. The advantages of a standard motorized tripod combined with the demand for a sophisticated appearance make it appropriate for office buildings, airports, and other high-traffic locations. During regular operation, its turnstile barriers are often in the home position. They will unlock after receiving a reliable signal. The arm will re-lock upon each arm rotation or timeout pre-set in the controller, preventing tailgating and ensuring that only authorized people can enter the facility.
As a security deterrent solution used to control large volumes of people daily in supervised environments, tripod barrier gate JDGD-1 is easy to be integrated with a variety of access control systems, such as RFID, biometric, and card readers. With its pleasing design, durable construction, and flexibility, it’s the perfect choice for a wide range of applications.
1. Panic / bar drop function with automatic reset
2. Ability to control the number and direction of people passing through the entrance
3. Sooth, quiet rotation
4. Easy to maintain and monitor
5. Easy, safe and fast to use
6. 120 ° Arm opening angles provide greater comfort in the passage
7. LED pictograms for intuitive user experience and high throughput in both directions
8. Visual LED indication strip at the front and back of the body makes it more dazzling and attractive
9. Red/green guidance lights acknowledge positive activation
10. Easy installation of access control equipment
Construction sites
Industrial and manufacturing facilities
Medical Hospitals
Recreational centers.
Stadiums and Arenas
Entrances and Lobbies
Athletic facilities
Housing Material | #304 stainless sheet |
Dimension | 420 x 330 x 980mm |
Power Supply | AC220V / AC110V, 50/ 60 Hz |
Channel Width | 550mm |
Arm Turning Angle | 120° |
Pass Speed | 35 persons per minute |
Input signal optional | Dry contact signal or +12V level signal or DC12V pulse signal |
Rotating Direction | Bi-directional |
Communication interface | RS485 |
Arm drop when power failure | Yes |
Open Time | 0.2 second |
Life Cycle | 5 million times |
Working Temperature | -30°C~+70°C |
Working Environments | Indoor, outdoor |
G.W | 40 kgs |
Package | export standard carton |
FAQ
Three stainless steel arms that are positioned at an angle of 120 degrees and revolve on an inclined axis make up the visible permanent barrier of the vertical tripod barrier gate. The tripod arms are often retained in a locked position, preventing access to the secured side when the tripod is operating normally. A working signal will cause the tripod arm mechanism to unlock. The arm will then lock again following each rotation or timeout that has been pre-set in the controller. The panic mode lowers the bars in an emergency, allowing unrestricted flow of traffic in both directions.
Please leave a message if you are interested in this model